WearMax DWR

• When multiple pieces of plywood are layered on top of each other (with grains going different directions) it creates an engineered balance. This balance prevents expansion, contraction, bowing, twisting and warping. This is the reason why engineered flooring can be installed below grade level's (in basements).
• The more ply's that are added, the more stable the plank is going to be.
• The 2mm decorative layer on this construction provides the ability to refinish the flooring up to 2 times. The flooring can be professionally re-screened an unlimited amount of times allowing it to last generations.

Our tongue and groove profile is truly innovative so you can be confident that once your flooring is installed, it is going to last for generations. Our highly experienced team of flooring manufacturing engineers have developed a T&G construction that makes installation easy to accomplish whether you want to glue, float, nail or staple the floor in place.

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.

Preserving our natural resources and environment are important at From The Forest. The raw materials used for the flooring products are sourced only from managed forests in the United States and our wear resistant, ceramic top coats, and stains are water-based (zero VOC) and UV cured to protect air quality and our adhesives meet the highest standards for air emissions. Our lumber is purchased from suppliers within 500 miles of our factory that have active reforestation programs and share our environmental responsibility. Only a portion of mature trees are cut, leaving other mature trees for seeding purposes, and smaller trees for future logging. We are committed to sustainable forest management and we encourage the use of wood as an environmentally acceptable and renewable material. We have not and will not purchase lumber from any supplier involved in improper practices.

• 100% of our raw materials are sourced only from sawmills with strict chain of custody standards in place for all raw materials
• All raw materials are sourced within 500 miles of our factory
• Formaldehyde free adhesives used in the construction of the flooring - 100% CARB Compliance with Zero VOC’s
• All topcoats are WearMax DWR and protect air quality
• All products are GREENGUARD certified

Made in the USA - Weston, Wisconsin is in the middle of the North American hardwood supply, reducing the environmental footprint as well as inventory and transportation costs. All raw materials are sourced within 500 miles of our factory.

Environmentally Focused – Strict chain of custody standards are followed. CARB compliant with zero VOC’s.

Best Top Coat in the Industry – WearMax DWR is used on all of our products and is the most water repellent as well as scratch, scuff and wear resistant finish in the industry.

Service - Midwest values with an experienced team of customer service and product engineers that will design and make wood flooring that looks great and performs exceptionally.

Value Priced Products - Due to efficient raw material sourcing from North American forests and innovative manufacturing processes.

Flexible Manufacturing and Creative Product Solutions - Allows customers many product features to choose from so they can customize and offer unique solutions.

Wood Repair Marker Kit

View detailed written instructions (do's & dont's) by clicking the button below

TONGUE AND GROOVE DO IT YOURSELF INSTALLATION

• Installs on all grade levels (basement approved)
• Installation Methods: glue, float, nail or staple
• Hickory: NOT approved for installation over hydronic radiant heat

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.
• Do it yourself! Follow written installation instructions and contact us if you have any questions.

WearMax DWR

• When multiple pieces of plywood are layered on top of each other (with grains going different directions) it creates an engineered balance. This balance prevents expansion, contraction, bowing, twisting and warping. This is the reason why engineered flooring can be installed below grade level's (in basements).
• The more ply's that are added, the more stable the plank is going to be.
• The thick 4mm decorative layer on this construction provides the ability to refinish the flooring up to 3 times. The flooring can be professionally re-screened an unlimited amount of times allowing it to last generations.

Our tongue and groove profile is truly innovative so you can be confident that once your flooring is installed, it is going to last for generations. Our highly experienced team of flooring manufacturing engineers have developed a T&G construction that makes installation easy to accomplish whether you want to glue, float, nail or staple the floor in place.

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.

Preserving our natural resources and environment are important at From The Forest. The raw materials used for the flooring products are sourced only from managed forests in the United States and our wear resistant, ceramic top coats, and stains are water-based (zero VOC) and UV cured to protect air quality and our adhesives meet the highest standards for air emissions. Our lumber is purchased from suppliers within 500 miles of our factory that have active reforestation programs and share our environmental responsibility. Only a portion of mature trees are cut, leaving other mature trees for seeding purposes, and smaller trees for future logging. We are committed to sustainable forest management and we encourage the use of wood as an environmentally acceptable and renewable material. We have not and will not purchase lumber from any supplier involved in improper practices.

• 100% of our raw materials are sourced only from sawmills with strict chain of custody standards in place for all raw materials
• All raw materials are sourced within 500 miles of our factory
• Formaldehyde free adhesives used in the construction of the flooring - 100% CARB Compliance with Zero VOC’s
• All topcoats are WearMax DWR and protect air quality
• All products are GREENGUARD certified

Made in the USA - Weston, Wisconsin is in the middle of the North American hardwood supply, reducing the environmental footprint as well as inventory and transportation costs. All raw materials are sourced within 500 miles of our factory.

Environmentally Focused – Strict chain of custody standards are followed. CARB compliant with zero VOC’s.

Best Top Coat in the Industry – WearMax DWR is used on all of our products and is the most water repellent as well as scratch, scuff and wear resistant finish in the industry.

Service - Midwest values with an experienced team of customer service and product engineers that will design and make wood flooring that looks great and performs exceptionally.

Value Priced Products - Due to efficient raw material sourcing from North American forests and innovative manufacturing processes.

Flexible Manufacturing and Creative Product Solutions - Allows customers many product features to choose from so they can customize and offer unique solutions.

Wood Repair Marker Kit

View detailed written instructions (do's & dont's) by clicking the button below

TONGUE AND GROOVE DO IT YOURSELF INSTALLATION

• Installs on all grade levels (basement approved)
• Installation Methods: glue, float, nail or staple
• Approved for installation over hydronic radiant heat

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.
• Do it yourself! Follow written installation instructions and contact us if you have any questions.

WearMax DWR

• When multiple pieces of plywood are layered on top of each other (with grains going different directions) it creates an engineered balance. This balance prevents expansion, contraction, bowing, twisting and warping. This is the reason why engineered flooring can be installed below grade level's (in basements).
• The more ply's that are added, the more stable the plank is going to be.
• The thick 4mm decorative layer on this construction provides the ability to refinish the flooring up to 3 times. The flooring can be professionally re-screened an unlimited amount of times allowing it to last generations.

Our tongue and groove profile is truly innovative so you can be confident that once your flooring is installed, it is going to last for generations. Our highly experienced team of flooring manufacturing engineers have developed a T&G construction that makes installation easy to accomplish whether you want to glue, float, nail or staple the floor in place.

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.

Preserving our natural resources and environment are important at From The Forest. The raw materials used for the flooring products are sourced only from managed forests in the United States and our wear resistant, ceramic top coats, and stains are water-based (zero VOC) and UV cured to protect air quality and our adhesives meet the highest standards for air emissions. Our lumber is purchased from suppliers within 500 miles of our factory that have active reforestation programs and share our environmental responsibility. Only a portion of mature trees are cut, leaving other mature trees for seeding purposes, and smaller trees for future logging. We are committed to sustainable forest management and we encourage the use of wood as an environmentally acceptable and renewable material. We have not and will not purchase lumber from any supplier involved in improper practices.

• 100% of our raw materials are sourced only from sawmills with strict chain of custody standards in place for all raw materials
• All raw materials are sourced within 500 miles of our factory
• Formaldehyde free adhesives used in the construction of the flooring - 100% CARB Compliance with Zero VOC’s
• All topcoats are WearMax DWR and protect air quality
• All products are GREENGUARD certified

Made in the USA - Weston, Wisconsin is in the middle of the North American hardwood supply, reducing the environmental footprint as well as inventory and transportation costs. All raw materials are sourced within 500 miles of our factory.

Environmentally Focused – Strict chain of custody standards are followed. CARB compliant with zero VOC’s.

Best Top Coat in the Industry – WearMax DWR is used on all of our products and is the most water repellent as well as scratch, scuff and wear resistant finish in the industry.

Service - Midwest values with an experienced team of customer service and product engineers that will design and make wood flooring that looks great and performs exceptionally.

Value Priced Products - Due to efficient raw material sourcing from North American forests and innovative manufacturing processes.

Flexible Manufacturing and Creative Product Solutions - Allows customers many product features to choose from so they can customize and offer unique solutions.

Wood Repair Marker Kit

View detailed written instructions (do's & dont's) by clicking the button below

TONGUE AND GROOVE DO IT YOURSELF INSTALLATION

• Installs on all grade levels (basement approved)
• Installation Methods: glue, float, nail or staple
• Approved for installation over hydronic radiant heat

• The nail pocket allows space for a staple or nail to be used without interfering with the way each plank interlocks with each other.
• Our innovative adhesive pockets allow more glue to be applied between the tongue and groove which creates a stronger bond to the planks and to the sub floor.
• Do it yourself! Follow written installation instructions and contact us if you have any questions.